一、保存放置
1、 Save Placement
禁懸空放置：放置于兒童不容易接觸到的地方，以免小朋友不小心掉落汽車模型，不但是車模損壞更有可能會傷害到小朋友。
Prohibited suspension placement: Place in a place that is not easily accessible to children to prevent them from accidentally dropping the car model. Not only is the car model damaged, but it is more likely to harm children.
禁高溫照射：不要長期暴露在陽光或高射燈下直射，容易造成車漆車輪和塑料配件老化、變形、皺裂，橡膠車胎容易氧化，產生熱溶解。
Prohibit high temperature exposure: Do not expose to direct sunlight or high beam headlights for a long time, as it can easily cause aging, deformation, and cracking of painted wheels and plastic parts. Rubber tires are prone to oxidation and thermal dissolution.
忌潮濕環(huán)境：如果鋅合金汽車模型長期放在較為潮濕的地方，車身的合金就會容易氧化，起黑點、漆面起泡等現(xiàn)象，所以盡量保持放置放置環(huán)境的干燥。
Avoid damp environments: If a zinc alloy car model is left in a relatively damp place for a long time, the alloy of the body will be prone to oxidation, black spots, paint bubbles, and other phenomena. Therefore, try to keep the storage environment dry as much as possible.
輪胎懸空放置：不同汽車模型廠家出產的模型重量都不盡相同。對于較重且需要長期放置的車模使用有機玻璃或小木塊把車輪墊高，避免輪胎變成“八字腳”或粘連在底座上。
Tire suspension placement: Different car model manufacturers produce models with varying weights. For heavier models that require long-term placement, it is best to use organic glass or small wooden blocks to raise the wheels to avoid the tires becoming "splayed" or sticking to the base.
留下包裝盒：這不但影響模型的觀賞度，更重要它會直接影響汽車模型收藏的價值和再次出售的價格。
Leave the packaging box: This not only affects the viewing quality of the model, but more importantly, it directly affects the value of the car model collection and the resale price.
二、鑒賞把玩
2、 Appreciation and play
切勿用力過猛：高仿真汽車模型都是許多零件組裝的，有些零件特別細小，所以一定做到防摔、防震、防壓，動手時候要小心仔細，切勿用力過猛。造成零部件損壞
Do not use excessive force: High simulation car models are assembled with many parts, some of which are particularly small, so it is necessary to be anti drop, shockproof, and anti pressure. Be careful and do not use excessive force when handling. Causing component damage
開門器：如果一時找不到開門器，可以使用明信片或者有一定硬度的塑料薄片代替。因為長期使用雙手打開車門對車身油漆損壞很大，甚至可能會拉壞車門。
Professional door opener: If you cannot find a professional door opener at the moment, you can use a postcard or a plastic sheet with a certain hardness to replace it. Because long-term use of both hands to open the car door can cause significant damage to the body paint, and may even damage the door.
三、保養(yǎng)維護
3、 Maintenance
清除灰塵：定期使用用軟毛刷撣灰、吹風機等工具對車模表面的灰塵進行擦拭。
Dust removal: Regularly use tools such as a soft bristle brush or hair dryer to wipe the dust on the surface of the car model.
漆面打蠟：合金汽車模型一般放置二到三個月后就需要使用車蠟或碧麗珠擦洗車面防銹。但需要注意的是每次打蠟要薄、勻，少。蠟多了就容易嵌進車模的縫隙里。
Paint Waxing: Alloy car models generally require the use of car wax or Bilizhu to clean the surface for rust prevention after two to three months of storage. But it should be noted that each wax application should be thin, uniform, and minimal. Too much wax can easily fit into the gaps in the car model.
