航空模型已發展為一種非常吸引人的娛樂玩具，很多專門的航空模型經過簡化、改良，安全性、趣味性都得到了很大的提升，還有很多動手能力強的朋友會自己制作航模。大型航天模型廠家認為有幾點需要注意：

The aviation model has developed into a very attractive entertainment toy. Many specialized aviation models have been simplified and improved, and their safety and fun have been greatly improved. Many friends with strong practical ability will make their own aviation models. Large aerospace model manufacturers think that there are several points to be noted:

得需要進行整體的設計，根據想要制作的航天類型、大小、材質等進行初步構思，構思設計需要考慮多方面的因素，包括翼型、機翼的面積、機翼安裝角、位置、機身長度、方向舵的面積、升降舵面積、發動機等等航天組裝的各個方面。在構思完成后，可以制作小型實物模型或者三維電腦圖。

It is necessary to carry out the overall design. According to the aerospace type, size, material, etc. to be produced, a preliminary idea should be made. The conceptual design needs to consider many factors, including airfoil, wing area, wing installation angle, center of gravity position, fuselage length, rudder area, elevator area, engine, and other aspects of aerospace assembly. After the idea is completed, you can make a small physical model or three-dimensional computer diagram.

其次在設計好航模各部分圖紙后，就可以開始按照?qǐng)D紙加工零件了，有激光切割機的可以自行加工，沒有的也可以找別人加工。

Secondly, after designing the drawings of all parts of the aircraft model, you can start to process the parts according to the drawings. If you have a laser cutting machine, you can do it yourself. If you don't have a laser cutting machine, you can find someone else to do it.

之后就是根據你之前的整體設計來進行組裝結構部件，此過程是比較看經驗的，組裝時一定要小心，組裝加工好后進行蒙皮操作，蒙皮為熱縮蒙皮，遇熱會收縮，且內面有膠水，可自行粘接在模型材料表面。

Then we will assemble the structural components according to your previous overall design. This process is based on experience. We must be careful during the assembly. After the assembly and processing, we will operate the skin. The skin is a heat shrinkable skin, which will shrink when heated, and there is glue on the inner surface. It can be self bonded to the surface of the mold material.

然后是，組裝好后還需要調試，調試內容包括舵面角度、靈活度、俯仰特性、動力曲線、響應曲線等，調試完成一切正常后就可以正式“服役”了。

Then, after assembly, commissioning is required, including rudder surface angle, flexibility, pitching characteristics, dynamic curve, response curve, etc. After commissioning, it can be officially "commissioned".

需要注意的是在選擇材料時，我們須了解材料，這樣我們才能選擇比較合適的材料。雖然材料在加工成好材料之前使用的材料幾乎相同，但加工過程中使用的工藝和技術仍然不同，較終使用航天模型的效果也完全不同。

It should be noted that when selecting materials, we must understand the materials, so that we can select more appropriate materials. Although the materials used before being processed into good materials are almost the same, the processes and technologies used in the processing are still different, and the effects of using aerospace models are completely different.

而且在測試航模飛行的過程中，別在航天模型掉落時不要加油門，很多新手們?cè)诳吹胶教炷Ｐ婉R上就要掉下來的時候，都會加大油門想要讓航天重新起飛，但是這樣往往會造成航天掉落之后還在油門下沖向地面，也會造成模型中的很多部件的損傷。關注我們http://2012xyx.com了解更多事項！

In addition, in the process of testing the model flight, do not use the fuel door when the space model is falling. Many novices will increase the accelerator to make the space flight take off again when they see that the space model is about to fall, but this often causes the space model to rush to the ground under the accelerator after falling, and also causes damage to many parts in the model. Follow us http://2012xyx.com Learn more!